|
Squid - Install
2014/08/12 |
|
Install Squid to configure Proxy Server.
|
|
| [1] | Install Squid. |
|
[root@prox ~]# yum -y install squid
|
| [2] | This is general forward proxy settings. |
|
[root@prox ~]#
vi /etc/squid/squid.conf
acl CONNECT method CONNECT
# line 29: add ( define new ACL ) acl lan src 10.0.0.0/24
http_access allow localhost
# line 57: add ( allow defined ACL above ) http_access allow lan
# add follows to the end request_header_access Referer deny all request_header_access X-Forwarded-For deny all request_header_access Via deny all request_header_access Cache-Control deny all # not display IP address forwarded_for off
/etc/rc.d/init.d/squid start Starting squid: [ OK ] [root@prox ~]# chkconfig squid on |
| [3] | If IPTables is running, allow Proxy port. For "-I INPUT 5" section below, Replace it to your own environment. |
|
[root@prox ~]# iptables -I INPUT 5 -p tcp -m state --state NEW -m tcp --dport 3128 -j ACCEPT
|